H.265 SDI video encoder
H.265 SDI Encoder User’s Manual
Introduction
SDI Encoder is a hardware device that independently developed by ShenZhen MINE technology and used for high-definition video signal (720P / 1080P, etc.) encoding and network transmission, using the latest and high-efficient high-definition digital video compression technology H.265, with the characteristics of reliable, high-definition, low bit rate and low latency. Input the SDI high-definition video signal to conduct the encoding process, after compression processing of DSP chip, output the standard TS network stream, the launch of product fills the gap in this industry, which is a direct replacement for the traditional capture card or software coding method, using hard-coded, the system is more stable, and image quality is more perfect, which can be used in a wide variety of needs for high-definition video and high-resolution and high frame rate acquisition-based IP network transmission, its powerful scalability makes it more easily to respond to the needs of different industries and can be used as live video encoder. Industrial controlled, precision design, small size, easy installation, the power is less than 5W, which is more energy and more stable.
1) Power input ----- 12V / DC input , using 12V1A power supply, if it is 5V input, chose 5V / 2A.
2) Initialization button------it is used to reset the device, when turned on, press and hold for 10 seconds, the device IP will back to factory IP, 192.168.0.31
3) HD video input ------ it is used for SDI signal input.
4) 1000M network port ------ 1000M Ethernet interface.
5) Status indication ------- if there is internet connection, the display light is on, when there is no network, the light is off. At reset, if the light is not on after 10 seconds, the device is restarted.
6) Power indication--- to indicate if the power is normal
SPECIFICATION
Input:
Video |
SDI |
||
Resolution
|
1920×1080_60i/60P、1920×1080_50i、1280×720_60p |
||
1280×720_50p, etc | |||
Coding |
H.264/H.265 |
||
Rate |
0.8Mbps~12Mbps |
||
Rate Control |
CBR/VBR |
||
GOP type |
Adjustable |
||
Video preprocessing |
De-interlacing, noise reduction, sharpening |
Audio: Encoding formatAAC、MP3Sampling rateself-adaptionBit rate32K,44.1K,48K,64K,96K,128K,160K,192KSampling accuracy24 bitCode rate64Kb/s~384Kb/s
System: RJ451000M internet accessHead streamHTTP,UTP,RTSP,RTMP,ONVIF protocalConfiguration interfaceWEB operation interfaceUpgradeThe software can be upgraded through internet
General: Size(width x length x height) 165*85*24mm WeightSingle set 0.3KG Temperature Range-20~60℃(working),-20~80℃(storage)Power supply12V/1ADC Power consumption5W/1 channel |
Settings
Step 1: Reset & initialization
Input the power supply to turn on encoder and hold a pin to press RST on the encoder for 10 seconds, it will be restarted and initialized. The default Route IP of dash board is 192.168.0.31 after initialization.
Step 2: Change the administrator’s computer IP (in case of WIN 7)
Set the administrator’s computer IP as : 192.168.0.* to avoid IP conflicting with dashboard IP 192.168.0.31. (mark “*” numbers range will be 0-254 except 31 )
Step 3: Login Dash board in IE
Enter 192.168.0.31 in URL address,
Default user Name: admin
Default password: admin
Connection:
Screenshot of setting :
Applications:
As HD encoder for IPTV
Digital HD/SD streaming sever.
Video conference
Replace HD Video Capture Card
Hotel cable TV system
live and recording broadcast for operating room.
live and recording broadcast for education
Digital HD live and recording broadcast for courtroom.
Access to network monitoring platform, support recording broadcast