Coal rod extrusion machine 1. Product introduction: Coal rod machine is also known as coal rod machine. Is a machine tool for the same shape of the same shape of the coal powder? Its working principle is: the motor through the triangle belt transmission to the transmission, the transmission output shaft through the floating coupling to push the propulsion shaft, the propulsion shaft on the propulsion of the coal feed through the forming die, and the output of high pressure coal rod. 2. Working principle: Coal rod extrusion machine is the principle of the use of screw extrusion, the modulation of the coal into a certain intensity of the predetermined shape of coal rod forming equipment. Coal rod extrusion machine adopts Hardened reducer, small volume, and high bearing capacity. 3. Structure feature: 1. Feeding into the material is a big, feeding and feeding speed, and the propulsion of the screw is small. 2. The shape base and the cylinder body adopt the rigid connection, the concentric degree is high, the anti-thrust, the machine is stable. 3. The need to seal the use of the fault structure, the dirt from the fault. 4. Triangle belt drive, smooth operation, low noise, and at the same time, overload protection. 5. The head and cylinder block are connected with the card ring structure and the bolt structure, according to the user need to choose the order. Gongyi Fu Yu Machinery Co., Ltd. is a professional production of rod machine, coal rod machine, coal rod extrusion machine, drying machine equipment manufacturers, our official website: www.ball-press-machine.com.